Customization: | Available |
---|---|
Type: | Differential Pressure Transmitter |
Structure Type: | Monocrystalline Silicon Pressure Transmitter |
Still deciding? Get samples of US$ 275/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Range limit | |
Within the upper and lower limits of the range, it can be set arbitrarily,Just make calibrate the range≥set range, It is recommended to select a range with the lowest possible turndown ratio to optimize performance. | |
Installation position influence | |
Changes in the installation position perpendicular to the diaphragm surface will not cause zero drift,If the installation position and the diaphragm surface change more than 90°,Null effects in the range < 0.4kPa will occur,It can be corrected by zero adjustment, no span influence. | |
Output Signal | |
4~20mA+HART protocol digital signal | |
RS485 Serial signal | |
Alarm current | |
offline | 3.6mA |
online | 21mA |
failure warning | |
If a sensor or circuit fails,Automatic diagnosis function automatic output 22.0mA | |
Response time | |
The damping constant of the amplifier part is 0.1S,The sensor time constant is:(0.1~1.6)S,depends on turndown and turndown ratio.The additional adjustable time constant is:(0.1~60)S. The effect on non-linear output (such as a square root function) depends on the function,and can be calculated accordingly. | |
Preheat time | |
<15S |
Measuring medium | |||
Measure the pressure of liquids, gases or vapors | |||
Benchmark accuracy (including linearity from zero, hysteresis, repeatability) | |||
±0.05% | ±0.075% | ±0.1% | |
long-term stability | |||
±0.1%*Span/3years | |||
Environmental temperature effect | |||
(-25~+65)ºC total affect value is:±(0.15*TD+0.05)%*Span (-40~-25)ºC and (+65~+85)ºC total affect value is:±(0.2*TD+0.05)%*Span |
|||
Power influence | |||
±0.001%/10V(12~36)VDC,negligible | |||
static pressure effect | |||
±(0.025%URL+0.05%Span)/10MPa(except differential pressure) | |||
Environmental temperature | |||
-40ºC~+85ºC With display:-20ºC~+65ºC | |||
Process temperature | |||
-40ºC~+125ºC | |||
Storage temperature | |||
-40ºC~+85ºC with display:-20ºC~+65ºC | |||
Display shows module temperature | |||
-20ºC~+70ºC | |||
Power supply and load conditions |