Water Treatment High Accuracy 4-20mA Hart RS485 80g FM Wave Radar Level Meter

• Customization: Available
• Type: Lightning Protection Type
• Structure Design: Straight Bar Type
• Model NO.: MRC-L-R101
• Pressure Range: -0.1~0.3 MPa
• Display Type: N/a
• Accuracy Grade: ±5mm
• IP Rating: IP67
• Certification: ISO
• Customized: Customized
• Measuring Medium: Solid
• Measuring Range: 0.1m~30m/0.3m~150m
• Process Connection: Flange ≥DN80
• Process Temperature: -40~120ºC/200ºC
• Process Pressure: -0.1~0.3 MPa
• Antenna Size: 76mm Lens Antenna
• Antenna Material: PTFE
• Accuracy: ±5mm
• Protection Level: IP67
• Center Frequency: 80GHz
• Launch Angle: 3°
• Power Source: Two-Wire System/DC24V Four-Wire System/AC220V Six-
• Shell: Aluminum/Plastic/Stainless Steel
• Signal Output: Two-Wire System/4...20mA/Hart Protocol Four-Wire
• Transport Package: Carton
• Specification: 2kg
• Trademark: XYT Meter
• Origin: China
• HS Code: 9026100000
• Production Capacity: 3000PCS/Month

Product Description

Product Description

 

Measuring medium: solid
Measuring range: 0.1m~30m/0.3m~150m
Process connection: flange ≥DN80
Process temperature: -40~120ºC/200ºC
Process pressure: -0.1~0.3 MPa
Antenna size:76mm lens antenna
Antenna material: PTFE
Accuracy: ±5mm
Protection level: IP67
Center frequency: 80GHz
Launch angle: 3°
Power source:   Two-wire system/DC24V
Four-wire system/AC220V
Six-wire system/DC12-24V
Shell: aluminum/plastic/stainless steel
Signal output: Two-wire system/4...20mA/HART protocol
Four-wire system/4...20mA/HART protocol
Six-wire system/4...20mA/HART protocol
 

Installation Instructions

1. Installation method 1:Flange mounting

When using flange mounting, the minimum
distance between the meter and the tank wall
should be 200mm.   
Note: Datum     
Container center or axis of symmetry
 

1. Installation method 2:Hoisting

(selected according to specific installation conditions)

1. Installation requirements:

When installing the instrument, avoid installing it above the material inlet, and try to avoid various objects that affect the signal, such as stirring paddles, etc.
Under extremely complex working conditions, the instrument  can work normally with the radar installation point as the center and no obstacles in the area with a radius of 20 cm.

Structure Size

1. The outer casing size  (unit: mm)

• Aluminum case:

• Stainless steel case:

1. Product Size  (unit: mm)

Technical Parameters

Process Connection                                                            Flange / material PP, PTFE, stainless steel, stainless steel +PTFE flanging
Antenna Material                                                                 PTFE
The outer shell                                                                    Cast aluminum / stainless steel / plastic ABS     
The seal between the shell and the shell cover                 Silicone rubber
Casing window                                                                   Polycarbonate
The ground terminal                                                           Stainless steel
Power supply pressure

1. wire system (single cavity/double cavity)              

                                                                   (15-28) V DC
                                                                   Power dissipation     max 80mA  DC24V/ 2W
                                                                   Allowable ripple    <100Hz                    Uss < lV
                                                                                                    (100~100K) Hz      Uss < l0mV 
     2. 4-wire system (double cavity)                           (198~242)V AC  
110V AC   Cable parameter                           
Cable entrance / plug                        1  M20×l.5 cable entrance
                                                          1  blind plug M20×l.5
Terminal                                            Conductor cross section 2.5mm²  
Output parameters                         
Output signal                                     (4~20) mA /HART

Company Profile

FAQ

1. How long will you reply to me?
Normally in 1 hours, no more than 12 hours.
2. How can I get the quotation?
Please provide specification and application including sensing element, pressure range, thread connection, pressure type, medium, electronic connection, shell material etc. More details, more accurate quotation and earlier response.
3. Can I get sample?
Contact with our staff online directly and they would check stock for you.
4. Can I visit your factory?
You are warmly welcomed, our factory is located at Baoji city, Shaanxi province, China.
5. Can we use our logo on the products?
Yes, we provide OEM/ODM service.
6. How long is your warranty period?
Warranty period from the date of acceptance of 12 months.
7. What is your terms of payment?
We could accept T/T, L/C, Western union, PayPal, credit Assurance.