| Customization: | Available |
|---|---|
| Type: | Calibrating Device |
| Pressure range: | Ammeter :0-33mA Voltmeter: 0-11V |
|
Still deciding? Get samples of US$ 209/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
TS05 debugger is a debugging tool for BS-30/31/32 series transfer board. It is easy to use and reliable, and supports 4-20mA, 0-10V, 0-5V, 1-5V, 0.5-4.5V and 5V proportional voltage supply selection different access modes through different terminal connections for board calibration.
1. Adopt large screen LCD display and panel touch button design, adopt panel stuck design, can be installed in the customer's production tooling as production equipment to use.
2. Built-in high-precision ammeter and voltmeter, with RS232 communication interface, you can communicate with the computer, calibrate the board through the computer, you can also use the debugger built-in function and panel keys to calibrate the board offline.
3. Reliable data verification and error detection mechanism to ensure the accuracy of user operations. With sound and display prompt function. make
This tool does not need an external ammeter, only a DC 24V power supply can be used. Tools are self-contained, work independently.
4.Transmitter with special parameters, the computer can be used to modify the parameters inside the tool through the upper computer software.
| Item | Description |
| Power supply |
DC24-28V(100m A)
|
| Current input |
4-20m ADC
|
| Voltage input |
0-10VDC
|
| Output1 |
DC20-24V(30m A)
|
| Output2 |
DC5V(30m A)
|
| Ammeter display range |
0.000-33.000mA
|
| Voltmeter display range |
0.000-11.000V
|
| Display | 192*64 dot screen, blue screen and green screen |
| Key interface | Tap film 20 key |
| Ammeter accuracy | 0.05%@room temperature |
| Voltmeter accuracy | 0.05%@ room temperature |
| Dimension | 172*94*30mm |
| Display size | 105*40mm |
| Temperature range | 10-45ºC |
| Protection level | Front panel IP65 |
| Computer interface | RS232 |
| Transmitter communication | Ehart |
| Storage | -20-60ºC |
| Cooling method | Natural cooling |
| Humidity | 20%-85%RH(no condensation) |
Wiring diagram
All power output or voltage input, the reference ground is GND, and there is a current sampling resistor between BS- and GND to collect back
The road current.
Note:The definition of the leading terminal at the transmitter end: the definition of the terminal label is affixed to the back of the tool.
a.The DDC24V voltage output is the 24V supply end
b. mA end 4-20mA input is the input end of the current converter board, used to measure the current
c.The GND end is the common ground end of 0-5V or 0-10 transmitter board
d. The 0-10V voltage input is the output measuring end of the 0-10V converter board
e.The 0-5V voltage input is the output measuring end of the 0-5V converter board
f.The 5V power output end is the 5V power supply end
| FAQ |
){kind=link}